| | Quality service and repairs are conducted by Scuba Frisco Sports' scuba equipment technicians who hold manufacturer’s certificates from virtually every major manufacturer of scuba equipment. Our staff’s combined experience in service and repair totals up to over 50 years. We will earnestly strive for the fastest turn-around possible. Normal turnaround time is 7 days. In no case should it take more than 10 work days for normal service and repair. Should we have to order parts or replacements, we will tell you in advance and give you an estimate on delivery. If you have a piece of equipment in for repair and we cannot meet your deadline for a dive trip, we will supply you with a loaner for your trip. Service rates are for labor only. Parts will be estimated at the time of acceptance for service. There is a $25 charge for rush jobs. 24 hour rush turn-around is guaranteed when parts are available. Items requiring special cleaning or unusual labor will incur a $10 extra service fee. Warranty work requires valid documentation at the time equipment is checked-in for service.
| Factory Authorized Warranty Service Center 



Learn about some of the special tools we use to care for your scuba gear. |
*** 10% Discount *** Divers presenting a c-card issued by any of our instructional staff, regardless of the issuing dive center, will receive a 10% discount on our labor rates. * C-card must be presented when checking-in equipment for service.
| Regulator Services | | Diagnostic Test | FREE | | Annual Service (1st stage, two 2nd stages, SPG, inflator hose) | $60 | | Annual Service (1st stage, one 2nd stage, SPG, inflator hose) | $45 | | Annual Service (1st stage or 2nd stage only) | $30 | | Annual Service for Integrated Alternate Air Inflator | $35 | | SpareAir® Annual Service | $30 | | Nitrox Ready Preparation | $15 | | SCBA Service | Quote | The only way to do an effective annual on a regulator is to disassemble it and examine each and every part and surface in the regulator, then clean, reassemble and test the regulator. Because we are going into the regulator anyway, we will use the manufacturer’s recommended annual replacements so you come away with an essentially brand new regulator on the inside. All regulators will be cleaned to be used with Nitrox (up to 40% O2). If the owner specifies we will replace all o-rings with Viton o-rings for Nitrox use. Unless instructed otherwise, we will service, replace batteries and function test all dive computers. Gauges will be de-oxidized at the fittings and new o-rings installed on the swivel. Gauges will be tested for accuracy to within factory specifications. |
| Tank Services | | Air Fill (valid certification card required) | FREE | | Nitrox 32% O2 Fill (valid nitrox certification card required) | $15 | | Nitrox 33-40% O2 Fill (valid nitrox certification card required) | $20 | | SCBA Air Fill | $5 | | Visual Inspection w/ Air Fill | $12.50 | | Hydrostatic Test w/ Visual Inspection & Air Fill | $45 | | Nitrox Ready Preparation w/ Labels and O-rings | $45 | | Valve Repair | $25 | | Internal Cleaning - Whip | $10 | | Internal Cleaning - Tumble | $30 | | SpareAir® Annual Service | $30 | Click Here for a special note about aluminum alloy cylinders. Tanks will be visually examined using the latest techniques and standards and eddy current technology when appropriate. Tanks requiring hydros will be sent out for testing. Tanks in for visual and hydro will be charged for in advance, and owner is responsible for disposal of failed cylinders. |
| BCD Services | | Diagnostic Test | FREE | | Annual Service w/ Standard Power Inflator | $25 | | Annual Service w/ Integrated Alternate Air Inflator | $35 | BCD’s will be tested for integrity of the air-cell, dump valves and inflator mechanism disassembled, cleaned, re-assembled and tested. In-line alternate air sources will be serviced like any other regulator. |
| Gauge and Dive Computer Services | | Dive Computer Diagnostic Test in Hyperbaric Chamber - 2 dive profile | $20 | | Analog Depth Gauge Diagnostic Test in Hyperbaric Chamber | $10 | | Dive Watch and Small Camera Housing Hyperbaric Chamber Test | $10 | | Dive Computer Batter Replacement and Leak Test | $20 | Unless instructed otherwise, we will service, replace batteries and function test all dive computers. Gauges will be de-oxidized at the fittings and new o-rings installed on the swivel. Gauges will be tested for accuracy to within factory specifications. We have the ability to very accurate test, in-water and under pressure, virtually any model or configuration of instrument/dive computer. We can check water tightness of many of the smaller digital camera and camcorder housings. We can verify larger systems in our 14ft deep pool, as almost all leaks are going to occur within that depth. |
| Drysuit Services | | Leak Test | $10 | | Valve Service | $25 | | Seal Replacement | Quote |
| Speargun Services | | Recharge Pneumatic Gun | $5 | | Pneumatic Gun Service | $45 | | Sling Gun Service | $30 |
| Other Services | | Knife - Clean and Sharpen | $15 | | Camera & Video Housing - Service Bulkhead Fittings & Pressure Test | $30 | | Dive Lights - Service Bulkhead Fittings, Replace O-rings & Pressure Test | $15 |
|
|
|
Home | Classes | Gear | Service | Travel | Resources | About Us | Contact Us, Map, and Directions
Scuba Frisco Sports • 6875 Main Street • Frisco,TX 75034 USA Tel 214-227-2494 • Fax 214-227-7583 • info@scubafriscosports.com Hours: Monday - Friday 10:00am - 6:00pm, Saturday 10:00am - 4:00pm, Closed Sunday Serving up scuba in Dallas, Frisco, Plano, McKinney, Allen, The Colony, Carrollton, Richardson, Lewisville, Little Elm, Flower Mound, Addison, Denton, and the North Texas area. Copyright © 2013 by Scuba Net, Inc. All rights reserved. |